Save on Steelcase Series Office Chair
Steelcase Series 1 Office Chair, Hard Floor Casters, Graphite/Pumpkin
Back mesh and Buzz2 seat fabric are 100 polyester
Wheels for hard flooring
Ergonomic president – this model includes malleable seat depth, height malleable ONLY arms, curvaceous seat height adaptation, slope pressure adaptation, flexing back with mesh upholstery and upholstered seat, seagull base and frame finish
All day comfort and back support – reverse technology features flexor system in the backrest conforms to your body and moves with you to support the chine as you change postures
Quality and continuity – designed to repel24/7 use while furnishing maximum comfort.
A Back That Flexes with You
Steelcase Series 1 features a LiveBack flexor system that conforms to your body and moves with you to support the spine as you change postures. The optional adjustable lumbar support lets you dial in comfort even further.
As you sit and move, Steelcase Series 1 responds automatically to provide comfortable resistance as you recline. One additional tension setting gives you the option to add more recline resistance to match your preference. Series 1’s adjustments also allow you to lock the back in an upright position.
Feature and Dimensions Of Steelcase Series 1 Chair:
This particular president has carpet casters. They will work on both hard bottoms and carpet, still they’re optimized for carpet.
The cylinder is installed with pressure, what you can do is, rather using a rubber mallet, hammer at the bottom of the cylinder while you pull on the base, this occasionally work but occasionally the cylinder slides backdown.However, you can reuse a return because that isn’t supposed to be, If this happens or if you don’t wish to do so.
veritably easy to assemble( however there’s a caveat to this below). Unlike numerous chairpersons that you have to squinch the bolts in every part to assemble it, this is veritably veritably easy; all of the pieces slide or snap together and some are formerly incompletely assembled( the essence seat base that attaches to the curvaceous cylinder is formerly attached to the seat, for illustration). The seat just slides in and and snaps into place with the reverse and the arms slide down into the holes and that is it. CAVEAT( and the reason I returned mine) the left arm of mine fitted into the hole forfeiture, but( unlike the right arm) didn’t stay in place( there’s a button on the nethermost side you push to acclimate the height of the arms this button did nothing on the left arm).
